Repeater Unit with Ethernet

In MainNet's PLUS system, RpEPLUS is an Ethernet-enabled repeater unit that re-transmits, as well as routes and controls the received signal – thereby extending the reach of communication between the head-end and the end-user. Featuring MainNet’s dynamic routing algorithm, the RpEPLUS uses the least-cost path to ensure the best communication quality.

RpEPLUS may be installed wherever an Ethernet connection is required, and is typically used to connect Smart Grid applications (electronic meters, surveillance devices, etc.), or to extend WiFi coverage by connecting Wi-Fi Hotspots to the communication server center. The unit communicates with a nearby network component, enabling the combined use of Smart Grid applications with broadband access solutions – within the same BPL/PLC network. RpEPLUS is remotely managed by MainNet's network management system, NmPLUS.

Specifications

Interfaces

• Power interface: 4-pin connector, only 2 pins in use (non-split power and data)
• Ethernet interface: 10/100BaseT, RJ45 connector
  
  Modulation
• OFDM
  
  LED Indicators
• Power and Network
  
  Physical Dimensions (W x H x D)
• 120 x 38 x 242 mm (4.72" x 1.50" x 9.53")
  
  Network Management
• Supported by NmPLUS, using SNMP V2 protocol
  
  Power
• Input Voltage:Input Voltage: 100 – 400 VAC
• Input Frequency:Input Frequency: 50 – 60 Hz
• Power consumption: 6 Watts maximum
  
  Environmental Conditions
• -20°C to +55°C
• 5% to 85% humidity
  
  Standards Compliance
• CE compliant
• EMC: EN55022, EN55024, FCC part 15
• Safety: EN50178, Category III (Category IV with grommet cable)
   
  Casing
• ABS + Polycarbonate UL 94-V0
• IP40
• IP52 (with grommet cable)